Description
DESCIPTION:
- Induction heating brings workpieces to the proper temperature faster than traditional methods and provides more control in sensitive areas such as upholstered and painted surfaces. It is an advanced, efficient method for heating parts prior to hardening, defrosting, etc.
- Even and stable heating. The object is heated evenly without local hot spots caused by flame based heating methods. Sensors ensure the part will not be overheated once the target temperature is reached.
- Safer and more comfortable working environment for the operator. The operator is not exposed to open flame, hot gases and risk of fire and explosion as with flame heating.
- Lower operator training costs, lower wage costs. The operators do not require frequent, regular training and certification as with autoge-nous and LPG based systems. Low consumable cost. No operating burdens related t o purchasing and leasing gas cylinders.
A HIGHLY ENERGY EFFICIENT HEATING SYSTEM
- Parts can be heated up to 800°C and above.
- KMi heater will heat a M12 bolt or a nut to a temperature over 500°C in only 20 sec.
- The preparation and setup time for an induction heating system is much faster compared to an autogenous burner system. Simply connect KMi heater to a 110V/230V socket, install the appropriate coil type onto the part you wish to heat, then push the ON/OFF button to begin the induction process.
- The heating process is accomplished in seconds, even for parts requiring red hot temperatures.
- Induction coils may be easily replaced with bigger or smaller ones. The same applies to the heating coil to be wrapped around the part.
- A set of coils of various diameters may be ordered as optional items together with the induction heater.
APPLICATION
- Automotive, railway and ship construction.
- Industry, machine construction, car repair shops, assembly shops, plumbers and heating engineers, house hobby rooms etc.
- Manufacture, repair renovation, maintenance.
- Parts that require heating such as bolts, rod and profile steel, metallic sheets, bearings, cases, driving shafts, suspensi-ons, nuts, pipes, gears, spring bases, shafts, lambda probes, machine and vehicle parts and components, exhausts, pulleys boxes, bushings etc.
- Heating of tools and parts prior to hardening, gluing, soldering.
- Defrosting.
- The same applications as those of LPG and autogenous burners
TECHNICAL DATA:
- Mains supply voltage AC 110V, 230V +10% -15% 50/60 Hz
- Input current max. 8A
- Input max. 1,65 kW
- Output max. 1,5 kW
- PF (power factor) 0,99 PFC
- Load factor 1,5 min. 100 %
- Coverage IP 20
- Size (LxWxH) 21 x 9 x 14
- Total length cm 120
- Weight kg 3,5
BASIC SET:
- Induction heater
- Coils (FLEXI, PAD, 8, 12)
- Plastic case
Discussion 0
No comments
Rating 0
No comments
Induction heater KMi X150
450 €
375 € excl. VAT
New comment